Detector Body Parts - Minelab F3 COMPACT Metal Mine Service Manual

_______________________________________________________________________________________________________________________
c. The wiring loom handle socket can now be removed and replaced. To fit the wiring loom
handle socket follow the removal instruction above in reverse order. Then assemble the
detector as described in Section

3.9.5 Detector Body Parts

This section of the manual describes the parts of the F3 COMPACT detector in the body of the
detector that are not covered by the range of service kits, figures 100 to 103 illustrate these
parts
0703-0203
31-24045-982
Screw M4x45
Wiring Loom Handle Socket
Connector to Interface PCB
Figure 99: Wiring Loom Handle Socket
3.2 Closing the Detector
31-24035-982
Screw M4x35
2703-0040
Figure 100: Detector left side
59
F3 COMPACT Service Manual
E-Clip
Body.
0703-0205
0304-0027