Programmable Input Ports - Smartgen HGM7110DC User Manual

8.3 PROGRAMMABLE INPUT PORTS (ALL ACTIVE WHEN
CONNECT TO GRAND (B-))
Form 3
No. Type
0 Users Configured
1 Reserved
2 Alarm Mute
3 Reset Alarm
4 Reserved
5 Lamp Test
6 Panel Lock
7
Reserved
8
9 Inhibit Auto Stop
10 Inhibit Auto Start
11 Inhibit Scheduled
12 Reserved
13 Aux Gen Closed
14 Inhibit Gen Load
15 1#Acc.Load Closed
16 2#Acc.Load Closed
HGM7110DC Genset Controller
Including following functions,
Indication: indicate only, not warning or shutdown.
Warning: warn only, not shutdown.
Shutdown: alarm and shutdown immediately
Trip and stop: alarm, generator unloads and shutdown
after hi-speed cooling
Trip: alarm, generator unloads but not shutdown.
Never: input inactive.
Always: input is active all the time.
From crank: detecting from generator start.
From safety on: detecting after safety on delay.
Can prohibit "Audible Alarm" output when input is active.
Can reset shutdown alarm and trip alarm when input is
active.
All LED indicators are illuminating when input is active.
All buttons in panel is inactive except
there is in the right of first row in LCD when input is
active.
In Auto mode, during generator normal running, when
input is active,
automatically.
In Auto mode, prohibit generator start automatically
when input is active.
In Auto mode, prohibit fixed timing start genset when
input is active.
Connect generator loading switch's auxiliary point.
Prohibit genset switch on when input is active.
Connect to the load switch's auxiliary point of 1#
Accumulator.
Connect to the load switch's auxiliary point of 2#
Version: 1.0
HGM7110DC Genset Controller
Description
prohibit generator
2014-09-27 Page 47 of 68
and
shutdown