Programmable Output Ports - Smartgen HGM7110DC User Manual

8.2 PROGRAMMABLE OUTPUT PORTS

Form 2
No.
0 Not Used
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6 Reserved
7 Custom Combined 1
8 Custom Combined 2
9 Custom Combined 3
10 Custom Combined 4
11 Custom Combined 5
12 Custom Combined 6
13 Reserved
14 Reserved
15 Reserved
16 Reserved
17 Air Flap Control
18 Audible Alarm
19 Louver Control
20 Fuel Pump Control
21 Heater Control
22 Cooler Control
23 Oil Pre-supply Output
24 Reserved
25 Pre-Lubricate
26 Remote Control Output
27 GSM Power Supply
28 Reserved
29 Close Gen Output
HGM7110DC Genset Controller
Type
Details of function description please see the
following.
Action when over speed shutdown and emergence
stop. It can close the air inflow to stop the engine as
soon as possible.
Action when warning, shutdown, trips. Can be
connected annunciator externally. When "alarm
mute" configurable input port is active, it can
remove the alarm.
Action when genset start and disconnect when
genset stopped completely.
It is controlled by limited threshold of fuel pump.
It is controlled by limited threshold of heater.
It is controlled by limited threshold of cooler.
Action from "crank on" to "safety on".
Actions in period of pre-heating to safety run.
This port is controlled by communication (PC).
Power for GSM module (GSM module is reset
when GSM communication failed).
Control generator to take load.
Version: 1.0
HGM7110DC Genset Controller
Description
2014-09-27 Page 42 of 68