Manual Start/Stop Operation - Smartgen HGM7110DC User Manual

4.4. MANUAL START/STOP OPERATION

1 Manual mode is selected by pressing the
illuminate to confirm the operation; Then press
automatically judge crank success and accelerate to high speed running. If high
temperature, low oil pressure, over speed and abnormal voltage occur during genset
running, controller can effectively protect genset to stop (detail procedures please refer to
No.2~6 of Auto Start Sequence). If generator is normal, users can energize "Gen Close
Relay" manually via
order to let the accumulator is charged.
2 Manual stop: pressing
please refer to No.2~4 of Auto Stop Sequence)
NOTE: Manual start/stop operations are used for Test only.
HGM7110DC Genset Controller
button or adjust engine speed manually via
key can shut down the running genset. (detail procedures
Version: 1.0
HGM7110DC Genset Controller
button; a LED besides the button will
button to start the generator, it can
2014-09-27
button in
Page 17 of 68