Smartgen HGM7110DC User Manual page 48

17 Auto Mode Lock
18 Auto Mode Invalid
19 Reserved
20 Reserved
21 Inhibit Alarm Stop
22 Aux Instrument Mode
23 Reserved
24 Reset Maintenance
25 Reserved
26 Aux. High Temp
27 Aux. Low OP
Remote Start
28
(On Load)
29 Reserved
30 Aux. Manual Start
31 1#Acc.Charge Closed
32 2#Acc.Charge Closed
33 Simulate Stop key
34 Simulate Manual key
35 Reserved
36 Simulate Auto key
37 Simulate Start key
38 Simulate Gen Load key
39 Reserved
40 Reserved
41 Reserved
42 Reserved
43 Simulate Raise Key
HGM7110DC Genset Controller
Accumulator.
When input is active, controller enters into Auto Mode;
all the keys except
in the right of first row in LCD.
When input is active, controller won't work under Auto
Mode. key and simulate auto key input does not
work.
All shutdown alarms are prohibited except emergence
stop.(i.e. battle mode or override mode)
All outputs are prohibited in this mode.
Controller will set maintenance time and date as default
when input is active.
Connect to sensor digital input.
Connect to sensor digital input.
In Auto mode, when input is active, can start genset
automatically and with load when genset is normal
running; when input is inactive, can stop genset
automatically.
In Manual mode, when input is active, can start genset
automatically; when input is inactive, can stop genset
automatically.
Connect to the auxiliary point of 1# accumulator.
Connect to the auxiliary point of 2# accumulator.
An external button; can be connected to simulate panel
button.
An external button; can be connected to simulate panel
Version: 1.0
HGM7110DC Genset Controller
are inactive and there is
2014-09-27 Page 48 of 68