Defined Combination Output - Smartgen HGM7110DC User Manual

148 Reserved
149 Reserved
150 Config1 High Warn
151 Config1 Low Warn
152 Config1 High Shutdown
153 Config1 Low Shutdown
154 Config2 High Warn
155 Config2 Low Warn
156 Config2 High Shutdown
157 Config2 Low Shutdown
158~229 Reserved
230 Stop Mode
231 Manual Mode
232 Reserved
233 Auto Mode
234 Generator On Load
235 Reserved
236 Reserved
237 Reserved
238 Reserved
239 Reserved

8.2.1 DEFINED COMBINATION OUTPUT

Defined combination output is composed by 3 parts, condition output S1 or S2 and condition
output S3.
S1 or S2 is TRUE, while S3 is TRUE, Defined combination output is outputting;
S1 and S2 are FALSE, or S3 is FALSE, Defined combination output is not outputting.
NOTE: S1, S2, S3 can be set as any item except for "defined combination output" which
is given in the section entitled Programmable Output Ports elsewhere in this manual.
NOTE: 3 parts of defined combination output (S1, S2, S3) couldn't include or recursively
include themselves.
Example,
Contents of condition output S1: output port 1 is active;
Close when condition output S1 is active /inactive: close when active (disconnect when
inactive);
Contents of condition output S2: output port 2 is active;
HGM7110DC Genset Controller
Action in stop mode.
Action in Manual mode.
Action in Auto mode.
Version: 1.0
HGM7110DC Genset Controller
2014-09-27 Page 45 of 68