Trip Alarm - Smartgen HGM7110DC User Manual

6.4 TRIP ALARM

On initiation of the trip condition the controller will de-energize the 'Close Generator' Output
without stop the generator.
Trip alarm as following,
No. Type
1 Gen Over Current
2 Digital Input
3 Charge Over Current
4 Charge Over Time
HGM7110DC Genset Controller
When the controller detects that the genset current has
exceeded the pre-set value and the action select "Trip", it will
initiate a trip alarm.
When digit input port is set as "Trip" and the alarm is active, it
will initiate a trip alarm.
When the controller detects that the accumulator current has
exceeded the pre-set value and the action select "Trip", it will
initiate a trip alarm.
If the charging is not finished within the preset time, and the
action select "Trip", it will initiate a trip alarm.
Version: 1.0
HGM7110DC Genset Controller
Description
2014-09-27 Page 27 of 68