Smartgen HGM7110DC User Manual page 44

Warn
1# Acc. Over Voltage
67
Shutdown
1# Acc. Under Voltage
68
Shutdown
69 Aux Input 1 Active
70 Aux Input 2 Active
71 Aux Input 3 Active
72 Aux Input 4 Active
73 Aux Input 5 Active
74 Aux Input 6 Active
75 Aux Input 7 Active
76~98 Reserved
99 Emergency Stop
100 Failed To Start
101 Failed To Stop
102 Under Speed Warn
103 Under Speed Shutdown
104 Over Speed Warn
105 Over Speed Shutdown
106 2#Acc Load Close
107 2#Acc Load Open
108~122 Reserved
123 Over Current
124~133 Reserved
134 2#Acc. Overvolts Warn
135 2#Acc. UndervoltsWarn
2#Acc.
136
Shutdown
2#Acc.
137
Shutdown
138 Reserved
139 High Temp Warn
140 Low Temp Warn
141 High Temp Shutdown
142 Reserved
143 Low OP Warn
144 Low OP Shutdown
145 OP Sensor Open
146 Reserved
147 Low Level Warn
HGM7110DC Genset Controller
Action when input port 1 is active
Action when input port 2 is active
Action when input port 3 is active
Action when input port 4 is active
Action when input port 5 is active
Action when input port 6 is active
Action when input port 7 is active
Action when emergency stop alarm.
Action when failed start alarm.
Action when failed stop alarm.
Action when under speed alarm.
Action when under speed shuts down.
Action when over speed warn.
Action when over speed shutdown alarm.
Two Accs：Control 2# accumulator to take load.
Two Accs：Control 2# accumulator to off load.
Action when over current.
Overvolts
Undervolts
Action when hi-temperature warning.
Action when low temperature warning.
Action when hi-temperature shutdown alarm.
Action when low oil pressure warning.
Action when low oil pressure shutdown.
Action when oil pressure sensor is open circuit.
Action when controller has low oil level alarm.
Version: 1.0
HGM7110DC Genset Controller
2014-09-27 Page 44 of 68