Enable Definition Of Programmable Output Ports - Smartgen HGM9560 User Manual

No. Items
23 Scheduled Stop PCT
24 Load Mode
25 Output (kW)
26 Output (kVar)
27 Min Start Sets
28 Not Reached Act
29 Request Start Delay
30 MSC Transformer
Maintenance Setting
1 Enable Setting
2 Cycle Selection
Not Start
3
( Week)
4 Not Start Time ( Day)
Not Start
5
( Hour)
Not Start
6
( Minute)
7 Total Time
Sync. Setting
1 Enable Setting

8.2 ENABLE DEFINITION OF PROGRAMMABLE OUTPUT PORTS

No.
0 Not Used
1~6 Reserved
7 Custom Combined 1
8 Custom Combined 2
9 Custom Combined 3
10 Custom Combined 4
11 Custom Combined 5
12 Custom Combined 6
13~17 Reserved
18 Audible Alarm
HGM9560 Bus Tie Mains Parallel Unit
Parameters
(0-100)%
(0-2)
(0-100.0)%
(0-100.0)%
(1-32)
(0-2)
(0-3600)s
(0~1)
(0~1)
(0~2)
Time
(0~6)
(1~31)
Time
(0~23)
Time
(0~59)
(0~30000)
(0~1)
Table 13 Definable Contents of Programmable Output Ports
Type
Details of function description please see the following.
Action when warning, shutdown, trips. Can be connected
annunciator externally. When "alarm mute" configurable input port
is active, it can remove the alarm.
Defaults
when start on demand.
Schedule the load value of other genset
50
when start on demand.
0：Bus Control；1：Mains Control；
0
2：Load Control.
30.0 Used for load control.
8.0 Used for load control.
When the controller does not detect the Min
1
Start Sets during the preset delay, it will send
1
corresponding alarm signal according to the
action type.
120
Action Type:
0：No Action; 1：Warn; 2：Trip.
0 0: Disable; 1: Enable
0 0: Disable; 1: Enable
0: Monthly
0
2: Daily
0 0~6 correspond to Sun.~Mon.
1 1~31 correspond to 1
0 0~23 correspond to 0~23'o clock.
0 0~59 correspond to 0~59 minutes.
30 Not scheduled running time, unit: min.
0 0: Disable; 1: Enable
Description
Description
1: Weekly
st ~31 st .
Page 30 of 47