Table of Contents
Advertisement
QB-V850E2
CHAPTER 2
2.1
IECUBE2 main
The following shows the names of IECUBE2 hardware units and their features.
（1）IECUBE2 main
（3）STATUS LED
(5) Power connector
(1) IECUBE2 main
IECUBE2 main is unit that controls debugging.
(2) POD
POD is sold separately. POD is IECUBE2 peripheral to interface with the target system. This unit is
equipped with the major features for emulating the real device. Please refer to user's manual of POD for
details.
R20UT0824EJ0101 Rev.1.01
2013.01.08
NAMES AND FUNCTIONS OF HARDWARE
（4） POD cable
(7) USB connector
Figure 2-1. Names of parts of IECUBE2
2.NAMES AND FUNCTIONS HARDWARE
（2）POD
(6) Power switch
(8) Cooling fan
Page 17 of 26
Advertisement
Table of Contents
