Contactless Configuration; Activate Contactless - Ingenico Tetra PTS190 Operating Manual

SKYZER TECHNOLOGIES

6.9.1 Contactless Configuration

This function allows the merchant to activate the contactless functionality on
the Move 5000 device.
The contactless is pre-activated from the hardware level of Move 5000 and will
only require activating the contactless from software end.

6.9.2 Activate Contactless

To activate contactless from software end, perform the steps below:
Step Terminal Display Description
1.0
2.0
FUYNCTION?
3.0
MULTI MERCHANT
SETUP
4.0
ACTIVATE CTL?
5.0
CONTACTLESS
ACTIVATED
6.0
MULTI MERCHANT
SETUP
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Press FUNC
Key in 7418 followed by ENTER
At MULTI MERCHANT SETUP, press 7
ACTIVATE CTL? will be displayed. Press ENTER to activate contactless
Contactless has now been activated on the terminal.
Press CANCEL to return to idle screen
PAGE 55 OF 140