Contactless Configuration - Ingenico 5100 Operating Manual

SKYZER TECHNOLOGIES

3.5.1 Contactless Configuration

This function allows the merchant to select the preferred COM port to operate
contactless solution through.
Perform the following steps to select the COM port to have the contactless
solution on.
Step Terminal Display Description
1.0
2.0 FUNCTION? FUNCTION? FUNCTION? FUNCTION?
MULTI MERCHANT MULTI MERCHANT
3.0 MULTI MERCHANT MULTI MERCHANT
SETUP SETUP
SETUP SETUP
4.0 CONTACTLESS CONTACTLESS CONTACTLESS CONTACTLESS
COM PORT COM PORT COM PORT COM PORT
0 0 0 0 - - - - NONE NONE NONE NONE
1 1 1 1 - - - - COM1 COM1 COM1 COM1
2 2 2 2 - - - - COM2 COM2 COM2 COM2
MULTI MERCHANT MULTI MERCHANT
5.0 MULTI MERCHANT MULTI MERCHANT
SETUP SETUP
SETUP SETUP
INGENICO 5100 PAYMARK VERSION 6.0 OPERATING GUIDE
Press FUNC
Enter 7418, press ENTER
Terminal is now in configuration mode. Go to following steps to proceed or press
CANCEL to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
Press 7 to Set Contactless Com Port
Select the com port number to have the contactless reader connected to.
By default, com port NONE will be selected.
Terminal is now in configuration mode. Press CANCEL to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
PAGE 37 OF 97
Version 1.3