Emv Chip Card Transaction - Ingenico Tetra PTS190 Operating Manual

SKYZER TECHNOLOGIES

8.11 EMV Chip Card Transaction

An EMV chip/smart card is a plastic payment card with an embedded
microprocessor.
When processing EMV chip card transactions, merchants and cardholders
have the choice of either a PIN or signature transaction. The Move5000
terminal supports pin bypass should this function be required.
Step Terminal Display Description
1.0
PAYMARK EFTPOS
1.EFTPOS MENU
2.TIPPING MENU
3.HOSPITALITY MENU
4.ADMIN MENU
5.SUPERVISOR MENU
2.0
EFTPOS MENU
1.PURCHASE
2.CASH
3.REFUND
3.0
PURCHASE AMOUNT?
4.0
CASH OUT AMOUNT?
$X.XX
5.0
PRESENT / INSERT
OR SWIPE CARD
6.0
ACCOUNT $XX.XX
CHQ SAV
F1 F2 F3
7.0
PIN OR ENTER
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Press MENU key and then scroll through using down arrow key until EFTPOS
MENU is shown on the display.
Press the corresponding number key or ENTER to access EFTPOS menu.
Press the corresponding number key or down arrow key to select PUR to perform a
purchase transaction.
Key in the purchase amount and press ENTER
$X.XX
Only applicable if the CASH OUT is turned on.
Press ENTER to bypass "CASH OUT
Insert the cardholder's chip card into the chip card reader at the front of the
terminal.
NOTE: The chip card must remain in the terminal until the 'REMOVE CARD'
prompt is displayed. If the card is removed to early the transaction will be
cancelled.
The cardholder presses the corresponding soft key to select their account type.
Example: Press F4 to select CR
CR
F4
The cardholder keys in their PIN number and proceeds with step 7.0 or presses
ENTER to proceed with the Signature step 12.0.
PAGE 89 OF 140