Extra Terminal Functions - Ingenico Tetra PTS190 Operating Manual

SKYZER TECHNOLOGIES

9.1 Extra Terminal Functions

The terminal provides extra terminal functions which are accessible from the
Supervisor menu.
Step Terminal Display Description
1.0
PAYMARK EFTPOS
1.EFTPOS MENU
2.TIPPING MENU
3.HOSPITALITY MENU
4.ADMIN MENU
5.SUPERVISOR MENU
2.0
SUPERVISOR MENU
1.XTRA
2.LOGON
3.DUPLICATE
3.0
1 Merchant 1
2 Merchant 2
3 Merchant 3
4.0
TERMINAL
FUNCTIONS
NOTE: Upon completion of desired function, terminal will return to idle screen.
Repeat steps 1-3 if required.
Press # Terminal Display
PRESS 0: Print Stored Transaction Totals
PRINTING
PRESS 1: Terminal Restart
RESTART
TERMINAL?
PRESS 2: Display KVC and print Terminal Configuration
PRINTING
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Press MENU key and then scroll through using down arrow key until SUPERVISOR
MENU is shown on the display.
Press the corresponding number key or ENTER to access SUPERVISOR menu.
Press the corresponding number key or down arrow key to select XTRA to access
Xtra functions.
Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by
ENTER.
Select desired function from option table listed below by pressing the corresponding
number key to activate chosen option.
Example: To print stored transactions totals, press 0 key
Description
Terminal will display PRINTING and will print a record of all stored transactions
awaiting transmission in the terminal.
Press ENTER to restart the terminal CANCEL to return to idle prompt.
If ENTER key is pressed, terminal will restart and soon return to idle prompt.
Terminal will display KVC and prompt to PRINT CONFIG Y/N.
Press ENTER to print off the terminal configuration report or CLEAR to exit and
return to idle screen.
PAGE 129 OF 140