Ingenico Tetra PTS190 Operating Manual page 105

SKYZER TECHNOLOGIES
5.0
TRAN
AUTH
CARD XXXXXX....XXXX
TOTAL AMT NZ$XX.XX
REQUIRED TRANS. Y/N
6.0
AUTH AMT
PARTIAL AMOUNT?
7.0
PRINTING
8.0
PROCESSING NOW
9.0
SIGN RECEIPT
10.0
SIGNATURE OK? Y/N
ENTER=YES,CLR=NO
11.0
SIG ACCEPTED
12.0
SIG DECLINED
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Details of selected transaction are displayed.
XXXXXX
XXXXXX
Press ENTER to print the pending transaction.
Press CLEAR to exit and return to previous screen.
NOTE: The total amount displayed will include the previously authorised amount
plus any top-up amounts already processed for this transaction. This is to notify
the merchant that a top-up transaction was performed.
Key in the partial amount to be finalised followed by ENTER.
$XX.XX
$0.00
PRINTING will be displayed on the terminal while printing off the receipt for the
cardholder to sign. Advise the cardholder to sign the receipt to accept the
transaction with the final amount.
PROCESSING NOW will be displayed on the terminal while processing the
transaction and will print off receipt where cardholder has to sign to accept the
transaction.
SIGN RECEIPT will be displayed on both terminal and pinpad screen. Tear the
receipt off and ask the cardholder to sign receipt.
Verify the cardholder's signature with the signature on the back of the card. If
the signature matches:
Press ENTER to accept and proceed with step 11.0
If not, press CLEAR to decline and proceed with step 12.0
SIG ACCEPTED will be displayed on both the terminal and pinpad screen. The
merchant presses ENTER to accept the cardholder's signature after verifying
signature with the card.
SIG DECLINED will be displayed on both the terminal and pinpad screen. The
merchant presses CLEAR to decline the cardholder's signature after verifying
signature with the card.
PAGE 105 OF 140