Tcp-Ip (Broadband) Rki Configuration - Ingenico Tetra PTS190 Operating Manual

SKYZER TECHNOLOGIES
6.11.3

TCP-IP (Broadband) RKI Configuration

Step Terminal Display Description
1.0
2.0
FUNCTION?
3.0
MULTI MERCHANT
SETUP
4.0
MULTI MERCHANT
SETUP
5.0
RKI CONFIG?
ENTER OR CLEAR
6.0
NII?
018
7.0
RKI
HOST IP ADDRESS
117.120.34.103
8.0
RKI
HOST PORT
7540
9.0
MULTI MERCHANT
SETUP
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Press FUNC
Enter 7418, press ENTER
Terminal is now in configuration mode. Go to following Steps to proceed or Press
CANCEL to exit, otherwise the terminal will automatically exit after 30 seconds of
inactivity
Select option 5 for RKI configuration by pressing the corresponding number key.
Press ENTER to proceed with the RKI configuration or CLEAR to cancel and exit to
idle screen
This parameter specifies the Network International Identifier that the terminal uses
to route messages to Paymark.
Press ENTER.
This parameter specifies the RKI HOST IP ADDRESS of the Paymark, where it will
be connecting to download the keys. By default, the RKI (PKMS) Host IP Address is
set as 117.120.34.103.
This parameter specifies the RKI HOST PORT of the Paymark, where it will be
connecting to download the keys. By default, the RKI (PKMS) Host Port is set as
7540.
Terminal is now in configuration mode. Press CANCEL to exit, otherwise the
terminal will automatically exit after 30 seconds of inactivity
PAGE 59 OF 140