Ingenico Tetra PTS190 Operating Manual page 37

SKYZER TECHNOLOGIES
7.0
DNS1 IP ADDR
XXX.XXX.XXX.XXX
8.0
DNS2 IP ADDR
XXX.XXX.XXX.XXX
9.0
GPRS PRIMARY
HOST PORT
33876
10.0
GPRS SECONDARY
HOST PORT
33876
11.0
USE DNS Y/N
1-YES 2-NO
12.0
IP Primary
HOST DNS
direct.paymark.co.nz
13.0
IP Secondary
Host DNS
direct2.paymark.co.n
14.0
GPRS Primary
HOST DNS
gprs.paymark.co.nz
15.0
GPRS Secondary
Host DNS
gprs2.paymark.co.nz
16.0
START TCP-IP Y/N
17.0
START GPRS Y/N
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Enter in the gateway IP address to forward the packets from.
Example: 192.10.1.1
Enter in the gateway IP address to forward the packets from.
Example: 192.10.1.1
This parameter specifies the GPRS Primary Port Number of Paymark network. By
default the host port number is set to 33876.
This parameter specifies the GPRS Secondary Port Number of Paymark network. By
default the host port number is set to 33876.
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark IP Primary DNS address. By default, it is set
to direct.paymark.co.nz. Press ENTER
This parameter specifies the Paymark IP Secondary DNS address. By default, it is
set to direct2.paymark.co.nz. Press ENTER
This parameter specifies the Paymark GPRS Primary DNS address. By default, it is
set to grps.paymark.co.nz. Press ENTER
This parameter specifies the Paymark GPRS Secondary DNS address. By default, it is
set to gprs2.paymark.co.nz. Press ENTER
Terminal prompts to start TCP-IP link. Press ENTER to start the link or CLEAR to
exit without starting.
Terminal prompts to start GPRS link. Press ENTER to start GPRS or CLEAR to exit
without starting GPRS link to Paymark.
PAGE 37 OF 140