Wifi Configuration - Ingenico Tetra PTS190 Operating Manual

SKYZER TECHNOLOGIES
7.0
HOST PHONE NO?
08797
8.0
USE DNS Y/N
1-YES 2-NO
9.0
GPRS Primary
HOST DNS
gprs.paymark.co.nz
10.0
GPRS Secondary
Host DNS
gprs2.paymark.co.nz
11.0
USE DNS Y/N
2-NO
12.0
GPRS Primary
HOST IP ADDRESS
117.120.35.3
13.0
GPRS Secondary
HOST IP ADDRESS
117.120.33.3

6.4 WIFI Configuration

1.0
IP PRIMARY
HOST PORT
33876
2.0
IP SECONDARY
HOST PORT
33876
3.0
ENABLE DHCP Y/N
1-YES 2-NO
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
This parameter specifies the phone number of Paymark network to dial to. By
default, the host phone number is set as 08797. Press ENTER.
NOTE: If the merchant has the Toll Bar on the site, then key in this phone
number 1797 to obtain connectivity to Paymark network.
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark Primary DNS address. By default, it is set to
grps.paymark.co.nz. Press ENTER
This parameter specifies the Paymark Secondary DNS address. By default, it is set
to gprs2.paymark.co.nz. Press ENTER
Option 2 – to allow the terminal to use Paymark IP address.
This parameter specifies the GPRS Primary IP address. By default, it is set to
117.120.35.3. Press ENTER.
This parameter specifies the GPRS Secondary IP Address. By default, it is set to
117.120.33.3. Press ENTER.
This parameter specifies the Primary TCP/IP Port Number of Paymark network.
Press ENTER.
This parameter specifies the Secondary TCP/IP Port Number of Paymark network.
Press ENTER.
Press the corresponding number key and press ENTER to set the IP address for the
terminal.
Option 1 – to allow the terminal to dynamically obtain its IP address and proceed
with step 7.0. Option 1 is selected by default.
Option 2 – to enter in static IP address for the terminal and proceed with step 4.0
PAGE 42 OF 140