Table of Contents
Advertisement
5.5.2.
Inserting a chip card
•
Chip Cards should be inserted into your terminal as illustrated with the chip facing
up and into the card reader
5.5.3.
Reading Contactless (Optional)
•
Bring the card firmly up to the active zone above the display (at about 1cm). Keep
the card close to the display during the transaction
Your contactless terminal has a row of four status lights that are visible on display.
•
When a contactless transaction is started the first (left hand) status light will be lit
steadily; this indicates that the contactless display is in use but a card is not being
read.
•
When a contactless card is presented to the contactless active zone during a
transaction the second, third and fourth status lights will be lit in turn. The card
read is successful when all four status lights are lit and the confirmation tone is
heard.
•
iSMP for Ipod Touch 4th
900004435 R11 000 05/1120
19/22
Copyright © 2011 Ingenico
All rights reserved
Advertisement
Table of Contents
