Ingenico Tetra PTS190 Operating Manual page 50

SKYZER TECHNOLOGIES
5- GPRS / Dial
6-TCP-IP / GPRS
7-TCP-IP/GPRS/DIAL
8-DIAL / GPRS
9-WIFI
0-TCP-IP / WIFI
9.0
COPY CONFIG TO
ALL MERCHANT Y/N
10.0
PLEASE WAIT
11.0
CONFIG ANOTHER
MERCHANT Y/N
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Press 5 for GPRS with Dialup as backup configuration followed by ENTER
and proceed with the configuration as on page 31.
Press 6 for TCP-IP/GPRS as backup configuration followed by ENTER and
proceed with the configuration as on page 33.
Press 7 for TCP-IP/GPRS/Dial-up as backup configuration followed by
ENTER and proceed with the configuration as on page 35.
Press 8 for DIAL/GPRS as backup configuration followed by ENTER and
proceed with configuration as on page 37.
Proceed with the configuration as normal, until CONFIG TO ALL MERCHANT
Y/N prompt and proceed as below.
Press 9 for WIFI configuration followed by ENTER and proceed with the
configuration.
NOTE: WIFI will only be available when enabled under FUNC 71
Press 0 for TCP-IP/WIFI as backup configuration followed by ENTER and
proceed with the configuration.
NOTE: WIFI will only be available when enabled under FUNC 71
This feature allows the merchant to copy the configuration from COMMS mode and
below to the entire active merchants if communicating through same medium.
Press ENTER to copy the current configuration to the entire active merchants or
CLEAR to cancel and proceed with configuring each merchant for its required
COMMS mode.
PLEASE WAIT will be displayed while copying the current merchant configuration
to the other active merchants.
Press ENTER to proceed with the configuration of the next merchant or CLEAR to
cancel and exit out from the merchant configuration.
PAGE 50 OF 140