Table of Contents
Advertisement
SKYZER TECHNOLOGIES
4.4.1 Contactless Configuration
This function allows the merchant to activate the contactless functionality on
the iCT250 device.
NOTE: iCT220 device doesn't have built-in contactless and will require pinpad
attached to support contactless by selecting USB.
Perform the following steps to enable contactless.
Step
Terminal Display Description
1.0
2.0
PAYMARK EFTPOS
1.EFTPOS MENU
2.TIPPING MENU
3.HOSPITALITY MENU
4.ADMIN MENU
5.SUPERVISOR MENU
3.0
ENTER PASSWORD?
4.0
FUNCTIONS
0 – TELIUM MANAGER
5.0
TELIUM MANAGER
1 - Cancel
2 - Consultation
3 - Refund
4 - Evolution
5 - Initialization
6.0
INITIALIZATION
1 - Parameters
2 - Hardware
3 - Password
4 - Header
7.0
INITIALIZATION
Date and time
Language
Terminal Number
Currency
Pabx
Pinpad
Contactless
Swipe
Serial Number
Network Access
Cash Connection
T.M.S
INGENICO ICT2XX 2017 PAYMARK SOFTWARE OPERATING GUIDE
Press MENU
Press 0 (Zero) key
Enter 6988 or 62624371 followed by ENTER
Press 0 (Zero) to select TELIUM MANAGER
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
Press 5 to select INITIALIZATION
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
Press 1 to select PARAMETERS
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
Press the down arrow key until Contactless is highlighted. Press ENTER to access
the function.
PAGE 50 OF 146
VERSION 1.0
Advertisement
Table of Contents
