Installing Paper Roll - Ingenico Tetra PTS190 Operating Manual

SKYZER TECHNOLOGIES

2.7 Installing Paper Roll

• Open the paper compartment by lifting the catch located at the top of
the contactless landing zone, and pull the cover to the rear of the
terminal Lift catch up Pull cover open
• Insert the paper roll into the compartment, as shown below
• Pull the paper up towards the top of the terminal
• Maintain the paper and close the cover.
• Press simultaneously on both upper corners of the paper compartment,
as shown by red arrows below, until it clips into position.
• If required, press the Feed key on the keypad to advance the paper
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
PAGE 14 OF 140