Ingenico Tetra PTS190 Operating Manual page 40

SKYZER TECHNOLOGIES
15.0
USE DNS Y/N
1-YES 2-NO
16.0
IP Primary
HOST DNS
direct.paymark.co.nz
17.0
IP Secondary
Host DNS
direct2.paymark.co.n
18.0
GPRS Primary
HOST DNS
gprs.paymark.co.nz
19.0
GPRS Secondary
Host DNS
gprs2.paymark.co.nz
20.0
START TCP-IP Y/N
21.0
START GPRS Y/N
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymarks DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark IP Primary DNS address. By default, it is set
to direct.paymark.co.nz. Press ENTER
This parameter specifies the Paymark IP Secondary DNS address. By default, it is
set to direct2.paymark.co.nz. Press ENTER
This parameter specifies the Paymark GPRS Primary DNS address. By default, it is
set to grps.paymark.co.nz. Press ENTER
This parameter specifies the Paymark GPRS Secondary DNS address. By default, it is
set to gprs2.paymark.co.nz. Press ENTER
Terminal prompts to start TCP-IP link. Press ENTER to start the link or CLEAR to
exit without starting.
Terminal prompts to start GPRS link. Press ENTER to start GPRS or CLEAR to exit
without starting GPRS link to Paymark.
PAGE 40 OF 140