Tcp-Ip Configuration - Ingenico Tetra PTS190 Operating Manual

SKYZER TECHNOLOGIES

6.2 TCP-IP Configuration

1.0
IP PRIMARY
HOST PORT
33876
2.0
IP SECONDARY
HOST PORT
33876
3.0
ENABLE DHCP Y/N
1-YES 2-NO
4.0
TERM IP ADDRESS
XXX.XXX.XXX.XXX
5.0
SUBNET MASK
XXX.XXX.XXX.XXX
6.0
GATEWAY IP ADDR
XXX.XXX.XXX.XXX
7.0
DNS1 IP ADDR
XXX.XXX.XXX.XXX
8.0
DNS2 IP ADDR
XXX.XXX.XXX.XXX
9.0
USE DNS Y/N
1-YES 2-NO
10.0
IP Primary
HOST DNS
direct.paymark.co.nz
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
This parameter specifies the Primary TCP/IP Port Number of Paymark network.
Press ENTER.
This parameter specifies the Secondary TCP/IP Port Number of Paymark network.
Press ENTER.
Press the corresponding number key and press ENTER to set the IP address for the
terminal.
Option 1 – to allow the terminal to dynamically obtain its IP address and proceed
with step 7.0. Option 1 is selected by default.
Option 2 – to enter in static IP address for the terminal and proceed with step 4.0
Enter in the static IP address for the terminal.
Example: 192.10.1.14
Note: Press the FUNC key to insert a dot in between numbers.
Enter in the subnet mask for the static IP address.
Example: 255.255.255.0
Enter in the gateway IP address to forward the packets from.
Example: 192.10.1.1
Enter in the gateway IP address to forward the packets from.
Example: 192.10.1.1
Enter in the gateway IP address to forward the packets from.
Example: 192.10.1.1
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark Primary DNS address. By default, it is set to
direct.paymark.co.nz. Press ENTER
PAGE 30 OF 140