Ingenico Tetra PTS190 Operating Manual page 90

SKYZER TECHNOLOGIES
For PIN Entry Transaction
8.0
PIN OR ENTER
****
9.0
PROCESSING NOW
10.0
REMOVE CARD
11.0
ACCEPTED
12.0
DECLINED
For Signature Transaction
NOTE: If the cardholder cannot remember their PIN or does not have a PIN, then the merchant has the option to accept
a signature transaction.
Complete steps 1-6 of the transaction process first
13.0
PIN OR ENTER
14.0
PROCESSING NOW
15.0
REMOVE CARD
16.0
SIGN RECEIPT
17.0
SIGNATURE OK? Y/N
ENTER=YES,CLR=NO
18.0
SIG ACCEPTED
19.0
SIG DECLINED
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
The cardholder to keys in their PIN number followed by ENTER.
PROCESSING NOW will be displayed on the terminal.
Remove card from the chip card reader.
NOTE: If no action is taken within 7 seconds, the terminal will proceed with
printing of the receipts and REMOVE CARD prompt will display again.
Transaction has been ACCEPTED with PIN entry and transaction receipt is printed.
Transaction has been DECLINED with PIN entry and transaction receipt is printed.
The cardholder to press ENTER on the terminal to proceed with a Signature
transaction.
PROCESSING NOW will be displayed on the terminal.
Remove card from the chip card reader.
NOTE: If no action is taken within 7 seconds, the terminal will proceed with
printing of the receipts and REMOVE CARD prompt will display again.
SIGN RECEIPT will be displayed on terminal screen. Tear the receipt off and ask
the cardholder to sign receipt.
Verify the cardholder's signature with the signature on the back of the card. If the
signature matches:
Press ENTER to accept and proceed with step 17.0
If not, press CLEAR to decline and proceed with step 18.0
SIG ACCEPTED will be displayed on both the terminal and pinpad screen.
SIG DECLINED will be displayed on both the terminal and pinpad screen.
PAGE 90 OF 140