Ingenico Tetra PTS190 Operating Manual page 23

SKYZER TECHNOLOGIES
9.0
Switch off
Phone paring
Add peripherals
Paired devices
Advance options
Base
10.0
Association
Advanced
Base State
Upgrade Base
11.0
New base
Select base
Remove base
Print base
12.0
REMOVE BASE
1234567

7654321
Base Removed
13.0
INGENICO Tetra PTS190 Paymark Operating GuideVersion 1.02
Select BASE on the terminal screen.
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
Select ASSOCIATION on the terminal screen.
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
Select REMOVE BASE on the terminal screen.
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
Terminal will display list of the paired up base on the screen. Select the base to be
removed followed by ENTER.
Terminal will display BASE REMOVED on the screen and return to previous
screen step 12.0
Press the CANCEL key unless and until you exit out from the menu and return to
idle screen.
PAGE 23 OF 140