Tcp-Ip Configuration - Ingenico iWL25 Series Operating Manual

SKYZER TECHNOLOGIES

5.2.3 TCP-IP Configuration

1.0
IP PRIMARY
HOST PORT
33876
2.0
IP SECONDARY
HOST PORT
33876
3.0
ENABLE DHCP Y/N
1-YES 2-NO
4.0
USE DNS Y/N
1-YES 2-NO
5.0
IP Primary
HOST DNS
direct.paymark.co.nz
6.0
IP Secondary
Host DNS
direct2.paymark.co.n
7.0
USE DNS Y/N
2-NO
8.0
IP Primary
HOST IP ADDRESS
117.120.34.110
9.0
IP Secondary
HOST IP ADDRESS
117.120.32.110
10.0
SAVE CONFIG Y/N
11.0
START TCP-IP Y/N
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE
This parameter specifies the Primary TCP/IP Port Number of Paymark network.
Press ENTER.
This parameter specifies the Secondary TCP/IP Port Number of Paymark network.
Press ENTER.
Press the corresponding number key and press ENTER to set the IP address for the
terminal.
Option 1 – to allow the terminal to dynamically obtain its IP address and proceed
with step 7.0. Option 1 is selected by default.
Option 2 – to enter in static IP address for the terminal and proceed with step 4.0
Press the corresponding number key and press ENTER to set for DNS or IP
Option 1 – to allow the terminal to use Paymark DNS address. Option 1 is
selected by default.
This parameter specifies the Paymark Primary DNS address. By default, it is set to
direct.paymark.co.nz. Press ENTER
This parameter specifies the Paymark Secondary DNS address. By default, it is set
to direct2.paymark.co.nz. Press ENTER
Option 2 – to allow the terminal to use Paymark IP address.
This parameter specifies the Primary Host IP Address. By default, it is set to
117.120.34.110. Press ENTER.
This parameter specifies the Secondary Host IP Address. By default, it is set to
117.120.32.110. Press ENTER.
Terminal prompts to save configuration. Press ENTER to save configuration on the
terminal or CLEAR to exit and return to idle screen.
Terminal prompts to start TCP-IP link. Press ENTER to start the link or CLEAR to
exit without starting.
PAGE 32 OF 132
Version 1.00