Sp Output; Auxiliary Output - Honeywell DCP551 Mark ΙΙ User Manual

SP output

Auxiliary output

Auxiliary output 1
Auxiliary output 2
When the programmer function is used (when setup data
processed as shown below.
Setup: programmer SP (in programmer operation mode) variable
SP
In MANUAL mode
Upper and lower limit scaling Setting: setup data
In READY AUTO mode
Current output 4 to 20mA
Output 1
Auxiliary output 1 is processed as shown below by a model with one or two auxiliary
output channels.
Auxiliary output 1 type Setting: setup data
Upper and lower limit scaling Setting: setup data
Current output 4 to 20mA
Auxiliary output 1
Auxiliary output 2 is processed as shown below on a model with two auxiliary output
channels.
Auxiliary output 2 type Setting: setup data
Upper and lower limit scaling Setting: setup data
Current output 4 to 20mA
Auxiliary output 2
parameter
PA11
MANUAL SP
,
C52 C53
Manipulated variable in READY mode Setting: setup data
C45
,
C46 C47
¥ When the auxiliary output type is SP
4mA
¥ When the auxiliary output type is PV2
C48
,
C49 C50
¥ When the auxiliary output type is SP
4mA
¥ When the auxiliary output type is PV2
Chapter 5. FUNCTIONS
C21
is set to 0), SP output is
C32
or deviation in the READY mode.
and a model with a PV input channel
is used.
or deviation in the READY mode.
and a model with a PV input channel
is used.
5-39