Parameter Setting List - Honeywell DCP551 Mark ΙΙ User Manual

Chapter 7. PARAMETER SETUP

7-2 Parameter Setting List

NOTE
7-4
"PVU (PV1)", "PVU (PV2) and "SPU" used in the "Factory Default Settings" and
"User Settings" columns in the lists on the following pages have the following
meaning.
PVU (PV1) : When the PV1 range type (setup data setting
resistance temperature detector, the PV1 decimal point position (setup data
C03
setting
When the PV range type is linear, the PV1 linear decimal point position
(setup data setting
For example, in a decimal point position of 1,
–19999 PVU (PV1) becomes –19999.9 and +20000 PVU (PV1) becomes
+2000.0.
PVU (PV2) : Like PVU (PV1), a PV2 range type (setup data setting
mal point position (setup data setting
position (setup data setting
change.
SPU : The SPU decimal point position (setup data setting
mal point position to change.
For example a decimal point position of 2,
–19999 SPU becomes –199.99 and +20000 SPU becomes +200.00.
) causes the decimal point position to change.
C04
) causes the decimal point position to change.
C13
C14
) causes the decimal point position to
C01
) is a thermocouple or
C11
), a PV2 deci-
) and a PV2 linear decimal point
C65
) causes the deci-