Chapter 5. Functions; Data; Data Types - Honeywell DCP551 Mark ΙΙ User Manual

Chapter 5. FUNCTIONS

5-1 Data

Data types

Data Parameter
Program
The data types are listed below.
For further information on data types, see "Chapter 7. PARAMETER SETUP" and
"Chapter 8. PROGRAM SETUP".
Variable parameter
Event configuration data
PID parameter
Setup data
Constant value control data
Pattern
Event
PID group and output limiter
group number
G.SOAK
PV shift
Repeat
PV start
Cycle
Pattern link
Tag
Data changeable in RUN mode
Event type data
PID group and output limiter group control parameters
Basic data only changeable in the READY mode
Constant value control SP, PID and other data
SP and time, SP and or SP and
G
Data for event 1 to 16
Data for PID group number used for control
and output limiter group number
Data indicating whether G.SOAK is provided or not
PV shift data
Data indicating whether repeat is used or not
Data indicating whether PV start is used or not
Cycle count data
Pattern link destination program number data
Tag (8 characters) data
SP data
,
5-1