Making Terminal Connections - Honeywell DCP551 Mark ΙΙ User Manual

Chapter 4. WIRING

4-3 Making Terminal Connections

To connect a line to the terminals, use crimp-style solderless wire connectors that fit an M3.5 screw.
HANDLING PRECAUTIONS
4-4
• If the DCP551 is mounted in a location subject to noticeable vibration or
impact, be sure to use round crimp-style solderless wire connectors to prevent
lines from becoming disconnected from the terminals.
• Be careful not to allow any of the crimp-style solderless wire connectors to
touch adjacent terminals or connectors.
• The terminal screws shall be tightened to 0.78 to 0.98 N
Unit : mm
3.7
m torque.
•