Auto Load Using External Switch Inputs - Honeywell DCP551 Mark ΙΙ User Manual

Auto load using external switch inputs

Conditions
Operation and action
HANDLING PRECAUTIONS
Memory card : Program saved to file number 1
C71
Setup data : any of
Mode : READY mode, normal display mode
Insert a memory card and turn off the external switch used for autoload and turn it back
on again.
The DCP551 operates as follows.
AUtO
• " " is displayed in display panel 1 and "
• When program number 1 has been loaded onto the DCP551, program number 1 dis-
appears.
• File number 1 on a memory card is loaded onto the DCP551 as program number 1.
• When a load operation is successful, the "
the normal display mode appears.
Unless the number of a program is selected using external switch inputs, program 1 in
segment 1 is selected.
• If the load operation fails, the "
code is displayed in the message panel.
When an error has occurred, press the DISP key to return to the normal display
mode.
Variable parameter PA05
Chapter 9. MEMORY CARD OPERATIONS
C74
to is set to 8 (autoload)
LOAd
AUtO
" and "
AUtO LOAd
" and "
can be set to 1 or 0.
" is displayed in display panel 2.
LOAd
" indications go off and
" indications stay on and an error
9-11