Program Run Mode Displays - Honeywell DCP551 Mark ΙΙ User Manual

Program run mode displays

DISP key function
Display A1
Display A2
Display A3
The DISP key is used to cycle through the displays in the following order: Display A1,
display A2, display A3, display A4, display A5, display A6, display A1.
PV
PV
SP
SP
When the programmer function is used in MANUAL mode, the number of digits avail-
able for SP recording flashes.
PV
PV
DEV
Deviation
PV
PV
OUT
Output value (%)
When the controller function is used in MANUAL mode, the number of digits available
for output values flashes.
Chapter 6. OPERATION
PROG SEG
Program Segment
number
number
PROFILE
Pattern trend
PROG SEG
Program Segment
number
number
PROFILE
Pattern trend
PROG SEG
Program
Segment
number
number
PROFILE
Pattern trend
6-3