Chapter 3. INSTALLATION AND MOUNTING
Installation procedures
HANDLING PRECAUTIONS
3-4
Mounting bracket
Mounting (2)
Mounting (1)
Mounting bracket
• Use the provided mounting bracket to firmly secure the upper and lower panels.
• Assemble the instrument before carrying out mounting (1).
When the provided mounting brackets are firmly secured and there is no loose-
ness, turn the screws only one full turn. Over-tightening the screws of the brack-
ets can deform or damage the case.
• The rear of the instrument must not be more than 10° above or below the horizontal
plane.
Not more than 10˚ above
horizontal plane at rear
Not more than 10˚ below
horizontal plane at rear