Connect Camera To Client Software - HikRobot MV-CL042-91CM User Manual

Camera Link Line Scan Camera User Manual
·
Figure 5-1 Installation Interface
4. Click Start Setup.
5. Set Options according to actual demands.
6. Finish the installation according to prompts.

5.4 Connect Camera to Client Software

Steps:
1. Run the MVS client software.
2. Click in Camera Link of the device list to search the camera.
The refresh process may take a few minutes, please wait patiently.
Figure 5-2 Search Camera
3. Right click the camera, and click Baud Rate Settings o set the baud rate to max. value.
4. Double click the camera, or click to connect it to the client software.
12