Chapter 3 Interface And Indicator; Power And I/O Interface; First Type Of Pin Definitions - HikRobot MV-CL042-91CM User Manual

Chapter 3 Interface and Indicator

3.1 Power and I/O Interface

All Camera Link line scan cameras have a 12-pin power and I/O interface, as shown below,
but their pin definitions are different by camera models.

3.1.1 First Type of Pin Definitions

Regarding type I and type III cameras, read the table below to get their pin definitions.
Refer to the pin definitions and labels attached to the power and I/O cable to wire the device.
No. Signal
1 GND
2 DC_PWR
3 LINE0_P
4 LINE0_N
5 GND
6 LINE3_P
Camera Link Line Scan Camera
Figure 3-1 12-Pin Power and I/O Interface
Table 3-1 First Type of Pin Definitions
I/O Signal Source
--
--
Line 0+
Line 0-
--
Line 3+
User Manual
·
Description
Power supply ground
DC power supply positive
Differential input/output IO 0+
Differential input/output IO 0-
Power supply ground
Differential input/output IO 3+
5