Concluding Steps - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Converting a tower model to a rack model
15.3

Concluding steps

"Installing the top cover" on page 66
Ê
Figure 309: Attaching the caution label
Ê Attach the caution label on the left front edge of the top cover as shown.
Ê Mount the support bracket and rack mounting rails in the rack as described
in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I
The document is available online or from the ServerView Suite DVD
2 supplied with your PRIMERGY server. The printed poster is
contained in the rack mounting kit.
Ê Mount the server in the rack as described in section
the rack" on page
Ê Reconnect all external cables.
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
Ê Change the chassis model setting to "rack server" as described in section
"Specifying the chassis model" on page
402
67.
103.
Upgrade and Maintenance Manual
"Mounting the server in
"Using the Chassis ID
105".
TX150 S8 / TX200 S7