Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual page 68

Basic hardware procedures
Figure 20: Mounting the server onto the rack rails
Ê Fully extend the telescopic rails until they lock in place (1).
Ê At a slight angle, lower the server onto the rear mounting point on the
telescopic rails (2).
Ê Fold down the server (3). Ensure that all six rack mounting bolts are properly
seated in the mounting points on the telescopic rails and that the locking
bars engage (4).
68 Upgrade and Maintenance Manual
TX150 S8 / TX200 S7