Concluding Steps; Replacing The Slimline Odd Or Lsd; Preliminary Steps; Removing The Defective Slimline Odd - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Accessible drives and LSD

12.6.2.4 Concluding steps

"Installing an HDD extension box" on page 172
Ê
"Installing the system fan holder" on page 77
Ê
"Reassembling" on page 64
Ê
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê

12.6.3 Replacing the slimline ODD or LSD

Upgrade and Repair Unit
(URU)
Tools: Slotted screw driver (for bending in or out accessible drive mounting
brackets)

12.6.3.1 Preliminary steps

"Locating the defective server" on page 47
Ê
"Removing backup and optical disk media" on page 82
Ê
"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
"Getting access to the component" on page 51
Ê
I
Removing the front cover is not required in order to replace the
slimline ODD or LSD module in the 2x 3.5-inch HDD extension box.
"Removing the system fan holder" on page 76
Ê
"Removing the HDD extension box" on page 179
Ê

12.6.3.2 Removing the defective slimline ODD

Ê Remove the slimline ODD from the 2x 3.5-inch HDD extension box as
described in section
314
"Removing the slimline ODD" on page
Upgrade and Maintenance Manual
Hardware: 10 minutes
310.
TX150 S8 / TX200 S7