Locating The Defective Component; Local Diagnostic Indicators On The Front; Local Diagnostic Indicators On The System Board - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

4.1.3

Locating the defective component

After determining the error class by the CSS or Global Error indicators (see
section "Determining the error class" on page
the front panel and system board allow you to identify the defective component.
I
For further information, refer to the "ServerView Suite Local Service
Concept (LSC)" manual.
4.1.3.1

Local diagnostic indicators on the front

Ê Check the CSS indicator on the front and connector panels of the server:
I
In addition to local diagnostic indicators, CSS or Global Error LEDs
indicate, if the defective component is a customer or field replaceable
unit (see section
4.1.3.2

Local diagnostic indicators on the system board

Using the Indicate CSS button
Ê Shut down and power off the server.
Ê Disconnect the AC power cord from the system.
I
It is mandatory to disconnect power cords in order to use the Indicate
CSS functionality.
Ê Press the Indicate CSS button to highlight defective components (see
section "Onboard indicators and controls" on page 421
I
In addition to local diagnostic indicators, CSS or Global Error LEDs
indicate, if the defective component is a customer replaceable unit or if a
service technician needs to be dispatched to replace the part (see
section "Determining the error class" on page
If the system has been powered off to replace a non hot-plug unit, a
system of PRIMERGY diagnostics indicators guides you to the faulty
component.
TX150 S8 / TX200 S7
"Determining the error class" on page
Upgrade and Maintenance Manual
Basic hardware procedures
48) local diagnostic indicators on
48).
).
48).
49