Ê If the removed slimline ODD is not to be replaced by a new drive, reinstall
the slimline ODD mounting bracket on the 4x 3.5-inch HDD extension box.
Secure the slimline ODD mounting bracket on the HDD extension box with
two screws.
12.7.2.3 Concluding steps
"Installing an HDD extension box" on page 172
Ê
"Installing the system fan holder" on page 77
Ê
"Reassembling" on page 64
Ê
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê
12.7.3 Replacing the slimline ODD
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver (for bending in or out accessible drive
mounting brackets)
12.7.3.1 Preliminary steps
"Locating the defective server" on page 47
Ê
"Removing backup and optical disk media" on page 82
Ê
"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
"Getting access to the component" on page 51
Ê
I
Removing the front cover is not required in order to replace the
slimline ODD or LSD module in the 2x 3.5-inch HDD extension box.
"Removing the system fan holder" on page 76
Ê
"Removing an HDD extension box" on page 179
Ê
TX150 S8 / TX200 S7
Upgrade and Maintenance Manual
Accessible drives and LSD
Hardware: 10 minutes
325