Installing The Slimline Odd - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

I
The front cover only needs to be removed in order to remove or install
accessible drive dummy covers. If the HDD extension box is already
installed in the server and will be removed in order to install a slimline
ODD or LSD module, the front cover can remain installed.
"Removing the system fan holder" on page 76
Ê
"Removing the HDD extension box" on page 179
Ê

12.6.1.2 Installing the slimline ODD

Figure 218: Removing the slimline ODD dummy module
Ê Press up on the locking tab to disengage the slimline ODD dummy module
(1).
Ê From inside the HDD extension box, press out on the ODD dummy module
and pull it out of its bay (2).
TX150 S8 / TX200 S7
Upgrade and Maintenance Manual
Accessible drives and LSD
(if applicable)
303