Hard disk drives / solid state drives
7.3.4
Installing 3.5-inch HDD modules
Customer Replaceable Unit
(CRU)
Tools: tool-less
7.3.4.1
Preliminary steps
"Removing accessible drive and HDD bay covers" on page 60
Ê
Ê Locate the correct drive bay as described in section
configurations" on page
7.3.4.2
Removing a 3.5-inch HDD dummy module
Figure 83: Removing a 3.5-inch dummy module
Ê Press in on the locking tabs on both sides of the dummy module to
disengage the locking mechanism (1).
156
152.
Upgrade and Maintenance Manual
Hardware: 5 minutes
"3.5-inch HDD
TX150 S8 / TX200 S7