Figure 268: Installing the UFM
Ê Connect the UFM to the system board (1), snapping in the UFM spacer.
Ê Fasten the nylon screw (2).
14.3.1.3 Concluding steps
"Reassembling" on page 64
Ê
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê
"Enabling SVOM boot watchdog functionality" on page 94
Ê
"Enabling BitLocker functionality" on page 100
Ê
14.3.1.4 Software configuration
The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Switch on the server.
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
TX150 S8 / TX200 S7
Upgrade and Maintenance Manual
System board and components
355