Removing The Slimline Odd; Preliminary Steps - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Accessible drives and LSD

12.7.2 Removing the slimline ODD

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver

12.7.2.1 Preliminary steps

"Removing backup and optical disk media" on page 82
Ê
"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
"Getting access to the component" on page 51
Ê
I
The front cover only needs to be removed in order to remove or install
accessible drive dummy covers. If the HDD extension box will be
reinstalled after removing the slimline ODD, the front cover can
remain installed.
"Removing the system fan holder" on page 76
Ê
"Removing an HDD extension box" on page 179
Ê
322 Upgrade and Maintenance Manual
Hardware: 10 minutes
TX150 S8 / TX200 S7