Removing The Lsd Module - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Ê Ensure that the four pins on the frame (see arrows) engage with the side
holes on the dummy insert.
Ê Insert the slimline ODD dummy module into the Multibay box and push back
until the locking tab engages as shown in

12.5.2.4 Removing the LSD module

Figure 215: Removing the 3.5-inch installation frame from the Multibay box (A)
Ê Remove two screws on either side of the Multibay box to disengage the 3.5-
inch installation bay.
Figure 216: Removing the 3.5-inch installation frame from the Multibay box (B)
Ê Slide the 3.5-inch installation frame out of the Multibay box as shown.
TX150 S8 / TX200 S7
Upgrade and Maintenance Manual
Accessible drives and LSD
figure 204 on page 291.
299