Replacing The Rear Fan; Preliminary Steps; Removing The Defectice Rear Fan; Installing The New Rear Fan - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

8.3.3

Replacing the rear fan

Field Replaceable Unit
(FRU)
Tools: tool-less
8.3.3.1

Preliminary steps

"Shutting down the server" on page 50
Ê
"Disconnecting the server from the mains" on page 50
Ê
"Getting access to the component" on page 51
Ê
"Removing the system air duct" on page 63
Ê
8.3.3.2

Removing the defectice rear fan

Ê Remove the rear fan as described in section
page 193.
8.3.3.3

Installing the new rear fan

Ê Install the rear fan as described in section
page 189.
8.3.3.4

Concluding steps

"Installing the system air duct" on page 64
Ê
"Reassembling" on page 64
Ê
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê
"Performing a fan test after replacing a defective fan" on page 106
Ê
TX150 S8 / TX200 S7
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Removing the rear fan" on
"Installing the rear fan" on
Fans
195