Switching On The Server - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

4.7

Switching on the server

V
CAUTION!
Before switching on the server, make sure the top / side cover is
●
closed. In order to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and satisfy cooling
requirements, the PRIMERGY TX150 S8 / TX200 S7 server must not
run while the top / side cover is removed.
Follow the safety instructions in chapter
●
page 35.
Ê Press the On / Off button to start up the server.
Ê Ensure that the power-on indicator above the On / Off button is lit green.
Ê Perform the required procedures described in the concluding steps of each
upgrade or maintenance task.
TX150 S8 / TX200 S7
Upgrade and Maintenance Manual
Basic hardware procedures
"Important information" on
75