Concluding Steps - Fujitsu PRIMERGY TX150 S8 Upgrade And Maintenance Manual

Figure 263: Removing the front panel connector
Ê Carefully unlatch the front LAN cable connector from the mounting bracket
(1).
Ê Pull the front LAN cable out through the mounting bracket on the front panel
frame and remove it (2).
Ê Install the front panel module cover on the front panel frame as described in
section "Installing the front panel module cover" on page
Ê Install the front panel module as described in section
panel module" on page

13.2.2.3 Concluding steps

"Installing the system fan holder" on page 77
Ê
"Reassembling" on page 64
Ê
"Connecting the server to the mains" on page 74
Ê
"Switching on the server" on page 75
Ê
"Enabling BitLocker functionality" on page 100
Ê
TX150 S8 / TX200 S7
337.
Upgrade and Maintenance Manual
Front panel and external connectors
"Installing the front
335.
345