Club Car Carryall 295 Maintenance And Service Manual page 77

HYDRAULIC AND PARK BRAKE SYSTEMS
1895
Figure 6-6 Axle Spindle Nut and Washer
3. Remove and discard the two hex-head bolts that secure the caliper assembly to the upright (Figure 6-7, Page
6-11). See following CAUTION.
CAUTION
• Wrap a plastic wire tie around the caliper body to a place on the frame so that it does not hang
suspended by the hydraulic brake hose.
4. Remove the outer tie rod end from the upright.
5. Remove the lower ball joint from the upright (Figure 6-8, Page 6-11).
1897
Figure 6-8 Lower Ball Joint and Upright
6. Remove the upper ball joint from the upright (Figure 6-9, Page 6-11). See following NOTE and CAUTION.
NOTE: It may be necessary to use a ball joint removal tool to separate the ball joint stud from the upright.
1896
1898
2008-2012 All-Wheel Drive Maintenance and Service Manual
Brake Disc and Hub – 2008-2011 Models
Figure 6-7 Brake Caliper and Upright
Figure 6-9 Upper Ball Joint and Upright
6
Page 6-11